Rear Shock Top Mount Bracket and Bushes 10mm
bmw Z3 1994 - 2002,
| Location | 30 |
| Qty per car | 2 |
Fitment Notes
Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models. Original BMW 10mm, AST 10mm, Bilstein HD, Sport, PSS Coilovers 10mm, FK Coilovers 10mm, H&R Coilovers 10mm, JRZ RS 12mm, Koni Sport 10mm, KW V1, 2, 3 10mm, ST Coilovers 10mm, Tein Coilovers 12mm. The above list is meant as a guide only. If your shock absorber brand is not listed, measuring the OD of the shaft will determine whether PFR5-5630-10 or PFR5-5630-12 should be fitted.
Powerflex Polyurethane Bushes
Bushes are one of the most highly stressed components fitted to a car. They undergo enormous strain, in the most arduous of conditions with no maintenance or lubrication. Conventional rubber bushes deteriorate with age allowing movement of suspension components and geometry. This can cause tyre wear, braking instability, poor handling and engine deflection.
Powerflex Suspension Bushes:- Improve your car's road holding and chassis performance
- Allow your suspension to function efficiently
- Tyres have increased road contact at all times
- Improved safety and performance
- Have the same noise absorption as rubber bushes
- Normally no increase in vibration / harshness through the car
Powerflex Bushes are made from a technologically advanced polyurethane plastic compound impervious to petrol and vehicle oil, which doesn't age or perish and has a longer working life - up to 3-4 times that of conventional rubber bushes. In addition this compound overcomes the common problem associated with harder bushes which is increased noise. By correct engineering the polyurethane compound bushes can be made 25-30% stiffer than rubber bushes, but with exactly the same noise absorption properties. Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable.
