Front Wishbone Front Bushes
Seat Toledo 1992 - 1999,
Fitment Notes
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
Powerflex Polyurethane Bushes
Bushes are one of the most highly stressed components fitted to a car. They undergo enormous strain, in the most arduous of conditions with no maintenance or lubrication. Conventional rubber bushes deteriorate with age allowing movement of suspension components and geometry. This can cause tyre wear, braking instability, poor handling and engine deflection.
Powerflex Suspension Bushes:- Improve your car's road holding and chassis performance
- Allow your suspension to function efficiently
- Tyres have increased road contact at all times
- Improved safety and performance
- Have the same noise absorption as rubber bushes
- Normally no increase in vibration / harshness through the car
Powerflex Bushes are made from a technologically advanced polyurethane plastic compound impervious to petrol and vehicle oil, which doesn't age or perish and has a longer working life - up to 3-4 times that of conventional rubber bushes. In addition this compound overcomes the common problem associated with harder bushes which is increased noise. By correct engineering the polyurethane compound bushes can be made 25-30% stiffer than rubber bushes, but with exactly the same noise absorption properties. Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable.
